EFDC Series

EFDC series control station with buttons and pilot are available in single to quadruple gang electric operator. They can be fixed with push button, light emergency push button with glass and hammer, mushroom with key and stayput, selector switches. The combinations can be seen in the selection table.

Drilled and  tapped entries
 Standard thread are: UNI 6125- NPT (ANSI B2.1) – METRIC (ISO7.1). Other types of threads on request.

Options.
External painting




EFD Series

The selectors in the EFD series include a wide range of command cam equipment with rotary movement in single or double housings, constructed with modular contact disks. In addition to the more common types available on catalogue, other types of lay-outs can be requested. The special material used in their construction makes them particularly suitable even for highly chemically aggressive environment including marine location.



EFSC Series

Technical features.
EFSC enclosures are provided with internal and external earthing screws and have two taper threaded entries. The operation shaft rotates within a stainless steel bush and have a weather protecting canopy. On request the handle is supplied with arrangement for padlock locking.

EFSC enclosures are used in industrial installation to contain switches for:

  1. manual starting of small motors
  2. on-off control of citcuit.
  3. Light insertion and instrument reading.
  4. Control of auxiliary circuits

Rated voltage: max 380 VAC (500 V possible)
Rated current: max 32.A

Drilled and tapped entries
Standard thread are: UNI 6125 – NPT (ANSI B2.1) – METRIC (ISO 7.1). Other types of threads on request.

Options
External painting.






EFSC Series

Type of protection: II 2 GD EEx d IIC - T6 T85°C o T5 T100°C
Conformity: Direttiva 94/9/CE (ATEX)
Applicable standards:
EN 60079.0, EN 60079.1, EN 61241, EN 60529
Certificate of conformity: INERIS 06 ATEX 0016
Other Certifi cates: Gost-R - RTN
Degree of protection: IP 66

Room temperature of use: -20°C + 40°C, -20°C + 55°C
Zones of use: 1 - 2 - 21 - 22

Drilled and tapped entries
Standard thread are:
UNI 6125 - NPT (ANSI B2.1) - METRIC (ISO 7.1).
Other types of threads on request.

Options
External painting.



Type of protection: II 2 GD EEx ed IIC T6 T85°C
Conformity: Direttiva 94/9/CE (ATEX)
Applicable standards:
EN 60079.0, EN 60079.7, EN 60079.11, EN 61241, EN 60529
Certificate of conformity: LOM 02 ATEX 2022
Other Certificates: Gost-R - RTN
Degree of protection: IP 65
Room temperature of use: -40°C + 55°C
Zones of use: 1 - 2 - 21 - 22

ASCS series enclosures use the AS series enclosures and are equiped indoor or on the cover with electrical components (terminals - push buttons - control switches - pilot lights - amperometers - etc.), in EEx e esecution. The mounting of the elctrical apparatusis is made on special slides, galvanized steel or insulating material, fi xed on suitable threaded nuts, cast on the inside bottom of enclosures.

Options
Drain valve • Breather valve • Mounting plate.